IFM AL1431 handleiding
Handleiding
Je bekijkt pagina 14 van 78
AL1431 IO-Link master with EtherCAT interface
14
6.4.2 Connecting IO-Link devices (class A)
CAUTION
Connection of IO-Link devices (class A) to IO-Link ports (class B) with 4 or 5-pole
connectors
w Risk of fire
w Malfunction
u To connect IO-Link devices (class A) to IO-Link ports (class B), use 3-pole connectors
only!
u Observe the IO-Link Design Guideline:www.io-link.com.
u Connect the IO-Link devices to ports X1...X4. Maximum cable length per port: 20 m.
u For connection, use M12 connectors (minimum protection rating: IP 65 / IP 66 / IP 67 / IP 69K).
u Tighten the cable plug using 1.3 ± 0.1Nm.
6.5 Ground connection
The FE potential is connected to the following points of the device:
• Upper mounting lug of the housing
• Ports XD1 and XD2: Pin 5 (FE)
• Ports XF1 and XF2
To ensure the protection of the device against electrical interference and to ensure the safe
function of the device, the housing has to be connected to the GND of the installation using the
shortest possible route.
u Ground the device via the mounting screw of the upper mounting lug.
u Optional: Connect pin 5 of port XD1 or XD2 via an L-coded M12 connector to the FE socket of the
power supply.
6.6 Voltage supply
The device is connected to the supply voltage US via port XD1.
The supply voltage US supplies the device and the devices connected to ports X1...X4 with voltage.
Optionally, an additional supply voltage UA can be fed to the device via port XD1.
CAUTION
Exceeding the maximum input current of 16A
w Risk of fire
u Dimension the IU and IA of the supply sources US and UA, taking into account the
derating behaviour of the device: Derating behaviour (Ò/15)
ATTENTION
The supply voltages US and UA are not protected against cross polarity.
w Damage to the device
u Ensure correct connection of the supply voltages US and UA.
Bekijk gratis de handleiding van IFM AL1431, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL1431 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6386 MB |
