IFM AL1327 handleiding
Handleiding
Je bekijkt pagina 29 van 125
IO-Link master with EtherNet/IP interface AL1327
29
ü New firmware has been downloaded. documentation.ifm.com
ü The parameter setting software has been started.
ü The connection to the device has been established.
ü The detailed view of the device is active.
u In the header: Click on .
w A dialogue window appears.
u Click on [Import firmware file].
w The file explorer appears.
u Select the firmware file (.bin) and click on [Open].
w The new firmware file is selected.
u Click on [OK].
w The firmware of the device is updated.
w The status of the update process is displayed.
w The firmware of the device has been updated.
9.1.17 Firmware: Resetting the device
Requirements:
ü The parameter setting software has been started.
ü The connection to the device has been established.
ü The detailed view of the device is active.
u Select the [Firmware] menu.
u Click on [Factory reset].
w The device is reset to factory settings.
w All parameters are set to their default values.
w The device is read again.
9.1.18 Firmware: Restarting the device
Requirements:
ü The parameter setting software has been started.
ü The connection to the device has been established.
ü The detailed view of the device is active.
u Select the [Firmware] menu.
u Click on [Reboot].
w The device is restarted.
w All set parameter values will be retained.
9.1.19 Setting the parameters of IO-Link devices
The device supports access to connected IO-Link devices (sensors, actuators).
Information about the parameters of the IO-Link device:
Ò Operating instructions IO-Link device
Ò IODD description of the IO-Link device
Bekijk gratis de handleiding van IFM AL1327, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL1327 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10357 MB |
