IFM AE3400 handleiding
Handleiding
Je bekijkt pagina 8 van 25
AE3400 IIoT controller
8
4 System description
4.1 Ethernet ports
The device has 4 Ethernet ports.
The device is connected to the IT network structure via the ethernet ports eth0 and eth1. The ethernet
ports eth0 and eth1 operate in bridge mode. The Ethernet ports allow several devices to be connected
in series (daisy chain).
The device is connected to the OT network structure via the eth2 and eth3 Ethernet ports. The eth3
Ethernet port provides access to the device's IoT Core Visualizer.
Factory settings:
Property
Ethernet port
eth0
1
eth1
1
eth2 eth3
Addressing DHCP Static Static
IP address Automatic 192.168.82.247 192.168.83.247
Subnet mask Automatic 255.255.255.0 255.255.255.0
Network gateway Automatic 0.0.0.0 0.0.0.0
1
The ethernet ports eth0 and eth1 operate in bridge mode (network bridge).
4.2 USB ports
The device has 2 USB ports (M12, USB 2.0). Additional devices can be connected via the USB ports.
Supported device types:
• USB storage media
• Mouse
• Keyboard
Supported file systems:
• FAT32
4.3 Status LEDs
The device has 3 LEDs.
The LEDs show the current system status and indicate error states.
The functional scope of the LEDs can be extended by the system creator.
4.4 Voltage supply
Depending on the operating conditions, the device can be connected to the voltage supply using the
following methods:
• Supply via on-board systems (via a battery) with 12 V DC / 24 V DC nominal voltage
• Supply via PELV according to the technical data
u Do not use both methods simultaneously to supply the device.
Bekijk gratis de handleiding van IFM AE3400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AE3400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1824 MB |
