IFM AE3400 handleiding
Handleiding
Je bekijkt pagina 11 van 25
IIoT controller AE3400
11
5.2.2 Pressure compensation element
The device is equipped with a pressure compensation element.
ATTENTION
Sealing of the ventilation ducts of the pressure compensation element with elastic materials
w Damage to the device
u Do not use any sealing materials in the area around the pressure compensation
element.
5.2.3 UV protection
The device meets the requirements for methods of exposure to laboratory light sources and
weathering according to DIN EN ISO 4892-2. Test criteria: procedure A, cycle 1: test duration 1000 h,
without affecting the functioning.
Additional measures to protect the device from UV radiation (e.g. shading, UV filter) are required to
ensure the expected service life when used permanently outdoors.
u If necessary, protect the device from UV radiation.
u Check the suitability of the selected UV protection and adapt it to the system’s area of application if
necessary.
5.2.4 Heat dissipation
The device can become very hot during operation. Heat is dissipated via the back of the device. The
distance between the back of the device and the mounting surface allows sufficient air flow to
dissipate the heat.
ATTENTION
Blockage of the air flow
w Damage to the device
u During installation, ensure sufficient distance between the back of the device and the
mounting surface.
u Observe the notes on the mounting surface!
5.2.5 Installation position
u In wet environments, install the device in such a way that no liquids can collect in the area of the
connectors.
Bekijk gratis de handleiding van IFM AE3400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AE3400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1824 MB |
