IFM AC1007 handleiding
Handleiding
Je bekijkt pagina 14 van 38
Functions and features
• The controller integrates 1 or 2 AS-i masters, a mini controller and a
field bus interface as an option.
• it controls the data exchange to the sensor/actuator level
• it processes the peripheral data in the integrated processor (signal
preprocessing)
• it works as stand-alone controller with data exchange to the PC
(visualisation).
• it communicates with the higher-level control system (in the gate-
way mode)
Programming interface RS232C
• baud rate 4800 to 62400 baud
• max. distance between controller and host: 20m
• no potential separation from the controller supply
• pin connections: pin2: Rxd; pin 3: Txd; pin 5: Gnd
Programming interface RS485
• baud rate 4800 to 62400 baud
• max. distance between controller and host: 1000m
• potential separation from the controller supply
• up to 31 controllers connected in parallel
• pin connections: pin3: signal B; pin 8: signal A
For the programming of an R485 controller the RS232C/RS485 con-
verter (order no. E70071) is necessary in addition to the programming
cable (order no. AC4010).
Mounting
Mount the controller onto a 35mm rail. The unit has protection IP20,
therefore it should be mounted in a protected place (e.g. switching
cabinet).
Ensure a condensation-free environment. Avoid excessive dust,
vibration and shock. The circulation of air through the vents
must not be hampered.
PAGE 14
Bekijk gratis de handleiding van IFM AC1007, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AC1007 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3210 MB |
