IFB Neptune VX Plus handleiding
Handleiding
Je bekijkt pagina 21 van 32
EN - 17
7.THE CONTROL PANEL
Press the Power On/Off button (1), the
Start/Pause light (7) will illuminate.
Select the programme most suitable for
your dishes using the Programme Selection
button (6).
Additional functions (2, 3, 4, 5) can also be
selected.
NOTE: Press the Extra button (2) once
to activate the Extra Rinse function. The
Extra Rinse light on the Remaining Time
Indicator (10) will illuminate. Extra washing/
rinsing steps are added to the selected
programme. Press the Extra button once
again to activate the Extra Dry function.
The Extra Dry light will illuminate so extra
heating/drying steps will be added to the
selected programme. Press the button a
third time to deactivate the functions, both
lights will switch off.
NOTE: Press the Extra Hygiene button
(3) to change the washing temperature and
duration, to ensure a more hygienic wash.
NOTE: Press the Tablet Detergent
button (4) when using a combined
detergent that contains salt, rinse aid or
other extras.
NOTE: Press the Half Load button
(5) to select the area of the dishwasher
containing dishes to be washed. You can
select both baskest, the upper basket
only, or the lower basket only. Press the
button until the light corresponding to the
basket contaning the dishes to be washed
illuminates. Dishes in other areas will not be
washed.
NOTE: If an extra feature has been
used on the most recent wash programme,
this feature will remain active on the next
selected programme. If you do not want to
use this feature on the newly selected wash
programme, press the feature button until
the light on the button switches off.
Press the Start/Pause button (7) to start
the selected programme.The light on the
Start/Pause button will switch off and the
Wash light (9) will illuminate. If the door of
your machine is opened while a programme
is operating, the Start/Pause light (7) will
flash.
The Wash, Rinse, Dry and End lights (9) on
the Control Panel indicate the status of the
programme in operation. The machine will
remain silent for 40 to 50 minutes while the
Drying light is on.
The Remaining Time Indicator (10)
displays the programme times and the time
remaining of the programme in operation.
NOTE: Simultaneously press the "+"
and "-" buttons for 3 seconds to activate/
deactivate the Child Lock. When it is first
activated, “CL” will show on the Remaining
Time Indicator for 2 seconds. When it is
deactivated, “CL” will flash once.
NOTE: When there is insufficient
softening salt, the Salt Lack Warning
Indicator (8) will illuminate to indicate the
salt chamber needs filling.
NOTE: When there is insufficient rinse
aid, the Rinse Aid Lack Warning Indicator
(8) will illuminate to indicate the rinse aid
chamber needs filling.
Delaying a Programme
Press the "+" and "-" buttons on the
Remaining Time Indicator to adjust
the programme delay time before the
programme starts. To change the delay
time, first press the Start/Pause button, then
use the "+" and "-" buttons to select a new
delay time. To activate the new delay time,
press the Start/Pause button.
7.1.Changing a Programme
Follow the steps below to change a
programme while in operation.
Bekijk gratis de handleiding van IFB Neptune VX Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFB |
| Model | Neptune VX Plus |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5409 MB |
