Handleiding
Je bekijkt pagina 28 van 39
Final stage of installation
• Place wind insulating covering around
the joints of the indoor unit and fix it with
insulating tape.
• Fix the exceeding part of the signal
cable to the piping or to the outdoor
unit.
• Fix the piping to the wall (after having
coated it with insulating tape) using
clamps or insert them into plastic slots.
• Seal the hole in the wall through which
the piping is passed so that no air Or
water can fill.
Indoor unit test
• Do ON/OFF and fan operate normally?
• Do the various modes operate
normally?
• Does the Timer function properly?
• Does each LED function normally?
• Do the flaps for airflow direction
operate normally?
• Is the condensed water drained
regularly?
Outdoor unit test
• Is there any abnormal noise or
vibration during operation?
• Could the noise, airflow or condensed
water drainage disturb the
neighbours?
• Is there any coolant leakage?
NOTE:
The electronic controller starts the compressor
three minutes after voltage has reached the system.
Suction Valve
Service Port Nut
Indoor Unit
Liquid Valve
Protection Caps
NOTE: The electronic controller starts the compressor
three minutes after voltage has reached the system.
24
27
Bekijk gratis de handleiding van IFB CI185SL22SGN1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFB |
| Model | CI185SL22SGN1 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5157 MB |
