Handleiding
Je bekijkt pagina 17 van 39
• Mode: ECO
• To activate the ECO mode, press the
Super button twice and it’s symbol
appears on remote display.
• In Cool Mode the temperature will
gradually rise to 27°C and the
compressor frequency will gradually
decrease.
• In Heat Mode ,the highest temperature
will be 25°C. The air conditioner will
keep the same temperature set is lower
than 25°C.
• Mode: HYBRID
• When this key is pressed, the HYBRID
feature will be activated and ‘’Hb’’ will be
displayed on the remote screen.
• This feature is used to get fast cooling to
achieve the desired set temperature.
• It is suggested to use this feature on hot
summer days.
• Mode: SELF CLEAN
• AC evaporator auto clean technology
adopts five steps of “condensation,
frosting, defrosting, drying and
sterilization” to keep the evaporator
clean for Fresh Air supply.
• To activate this feature press & hold
swing key for 3 seconds “CL” will
be displayed on the remote screen and
indoor display.
NOTE: Cooling is optimized in Eco Mode to save
electricity
NOTE: HYBRID feature will work efficiently in
standard voltage & temperature conditions.
This function is available in selected models only.
This feature will only be activated in Cool mode.
NOTE: The Self Clean feature can be used at 21 to 39ºC
temperature range. If the humidity in the room is high,
the area near indoor unit may become foggy and a
‘’tick-tick’’ noise may be heard because of freezing on
heat exchanger. This function is available in selected
models only. Once AC enters into this feature, all other
modes/functions can’t be used for smooth completion
of cleaning.
NOTE: This feature is available in Cool Mode only.
MODEL INITIALS
1st
press
2nd
press
3rd
press
4th
press
5th
press
C1
0.9
0.9
1.3
1.2
1.2
1.7
CI12/CI13/HI13
CI17/CI18/CI19/HI18
CI185
CI20/CI21
CI22/CI23/CI24/HI24
CI14/CI15
C2
0.8
0.8
1.2
1.0
1.0
1.5
C4
0.6
0.6
0.8
0.6
0.6
1.0
C5
0.5
1.2
0.6
1.5
1.7
0.8
C3
0.7
0.7
1.0
0.8
0.8
1.2
• Mode: ANTIMILDEW
• To activate the ANTIMILDEW, press uni &
hold Health keyfor3sec.
• The Anti Mildew Mode is used for drying
the indoor cooling unit.
• The indoor blower works for some time
and indoor unit display will show '--'
after AC is switched off to dry ,the unit
will switcg off thereafter.
• If power ON/OFF button is pressed
during the operation the Antimildew will
be cancelled.
• Mode: FLEXI
• This feature is used to select flexible
capacity as per customer selection.
• When this key is pressed, C1, C2, C3, C4,
C5 is displayed on remote and
respective capacity is displayed on IDU
as per below table.
16
SWING
Bekijk gratis de handleiding van IFB CI1832D223GM1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFB |
| Model | CI1832D223GM1 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5434 MB |