Handleiding
Je bekijkt pagina 15 van 28

We now have programmed our oven to get the food ready at 21:30. Since the cooking time was
preprogrammed as 2 hours 15 minutes, your oven will start cooking at 19:15, so that the food is ready
at 21:30.
Screen just when cooking starts Screen just when cooking ends
When automatic cooking is completed, a buzzer alarm is heared and will sound, if not stopped, for 7
minutes.
1) Switch your oven OFF 2) Reset the timer.
or
Note: Your oven will be inoperative until you reset the timer.
In the example shown, cooking time has been programmed first, the ready time was calculated
automatically and was editted by us. It is also possible first to program the ready time, in that case the
cooking time will be calculated automatically and should be editted thereafter.
BUZZER VOLUME ADJUSTMENT
You may adjust the buzzer tone of the timer in the following way:
1) Pressing and holding the ‘–‘ button, you can hear the current buzzer tone. Releasing and pressing
again will switch to the next tone ( 3 different tones available )
2) The buzzer tone will be set to the last adjusted tone.
Note: As factory setting, the buzzer volume is set to the high tone. In case of a long power loss, the
set buzzer tone will be this one.
B) Adjustment of Mechanical Timer : ( for 656 MTC/ E-RTC )
Mechanical cut off timer will switch off the oven after the set time ,beside that it will give the Buzzer also.
It's a cut off timer.
Example: If time is set for 50 miunte after the 50 minute oven will also switch off automatically , it will give
the buzzer also .
Bekijk gratis de handleiding van IFB 656 ETC/E-RCT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFB |
| Model | 656 ETC/E-RCT |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 3927 MB |