IDIS NK-1200 handleiding

45 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 35 van 45
35
Part 6 - Appendix
Troubleshooting
Symptom Possible Solution
A device cannot be
controlled.
Check the connection. When controlling the device via RS485 connection, the
device must be properly connected to the RS485 port on the network keyboard.
When controlling the device via network connection, both the device and the
network keyboard must be properly connected to the network.
Check whether the device is registered on the network keyboard properly. To
control the device in Basic mode, the device must have been registered in Basic
mode. To control the device in Advanced mode, the device must have been
registered in Advanced mode.
A PTZ camera cannot be
controlled.
Check the PTZ camera settings in the NVR if the PTZ camera is connected to a
NVR.
Check whether the PTZ camera is properly registered on the network keyboard if
the PTZ camera is directly connected to the network keyboard.
Check the camera settings. The type of the camera must have been set to PTZ
Camera. (On the IDIS Discovery program: Setup > Remote Setup > Device >
Setup > Type of camera: PTZ Camera)
Cannot connect to the
IDIS Discovery program
because of lost or incorrect
password.
If you lost the password, perform the factory reset and customize all settings again.
The factory reset function returns all the settings including network settings to the
factory defaults. Write down and store the password in a safe place so that you may
not go through this process again.
Buttons
Buttons work correctly only when the device supports the functions and it is registered on the network keyboard, and the
setup is proper.
Operating wise, “ indicates that the buttons are pressed sequentially, and “&” indicates that the buttons are pressed at
the same time.
If the device is the video management system, the buttons function dierently as the explanation below. For more
information about the control buttons, refer to the operation manual of the video management system.

Bekijk gratis de handleiding van IDIS NK-1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkIDIS
ModelNK-1200
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4905 MB