IDIS DP-HE1201 handleiding
Handleiding
Je bekijkt pagina 16 van 44
Part2 - Remote Setup
16
• Setup
- Load Default Setup: Restores all settings other
than Date/Time to their factory defaults. Select
Include Network Setup to load default network
settings as well. For more information on network
setup, refer to the Network on page 18.
- Import Setup: Open a setup le and apply its
settings to the encoder. Click on the button and
then select a setup le. Select Include Network
Setup to apply the le’s network setup settings (exc.
FEN). For more information on network setup, refer
to the Network on page 18.
- Export Setup: Export the cu
rrent settings as a dat
le. Click on the button and then enter a
le name.
• When applying the settings of a setup le, do not
select the Include Network Setup option if the
network settings contained in the selected le
is currently being used by a dierent encoder.
Doing so can interfere with establishing a
connection with the other encoder.
• If IP Address, Port, and/or SSL settings have been
changed, click Save to apply the current settings,
and then restart Remote Setup. If you do not
restart Remote Setup, the changes afterwards will
not be applied.
Date/Time
• Date/Time: Change the encoder’s date/time settings
and display formats and congure the time zone and
daylight saving time settings. Click Save to apply the
changes right away.
• Time Sync
- Automatic Sync: Select to synchronize the system’s
time with the time server at a specied interval.
Enter the time server’s IP address or domain name
and then specify the interval. If the time server
is FEN-enabled, select the Use FEN option and
then enter the time server’s name instead of its IP
address or domain name.
- Run as Server: Select to run the encoder as a
time server. Other devices will then be able
to
synchronize its time setting with this encoder’s time
setting.
If you wish to enter a domain name instead of an
IP address for the Time Server setting, DNS server
must be congured during Network setup. If you
wish to enter a server name instead of an IP address
or a domain name, the Use FEN option must be
enabled during Network setup.
Bekijk gratis de handleiding van IDIS DP-HE1201, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IDIS |
| Model | DP-HE1201 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4342 MB |
