IDIS DC-S6281FX handleiding
Handleiding
Je bekijkt pagina 23 van 49
Part 1 - Remote Setup
23
PTZ
Preset
Select the Preset tab and congure preset settings.
Displays a list of preset. The number indicates the preset
number. Click Setup button to congure the preset.
Use the buttons below to choose a preset position.
-
, , , , , , , (Direction): Used to tilt
and pan the camera.
- Zoom
(In/Out): Zoom in and out.
- Focus
(Near/Far): Adjust camera focus to far
or near.
- Speed: Specify the camera’s panning and tilting
speed.
• Set: Choose a preset number and then enter a name.
This saves the current preset under the specied
preset number and name.
• Go To: Select a preset from the list and then click Go
to to move the camera to the selected preset position.
• Edit Name: Used to change the selected preset’s
name.
• Remove: Used to remove the selected preset.
Scan
Select the Scan tab and congure scan settings.
Used to set up a prole for moving the camera
between two points. At least two presets must be
available in order to use the scan feature.
Displays a list of scan. The number indicates the scan
number. Click Setup button to congure the scan
settings.
• Set: Displays a setup window.
- Name: Enter a name for the scan prole.
- Start, Stop: Specify which presets to use as start
and stop points.
- Dwell Time (sec.): Specify how long the camera will
dwell at start and stop positions.
- Speed, Direction: Specify scanning speed and
direction.
• Run: Select a scan prole and then click the Run
button to perform the scan function.
• Edit: Used to edit the selected scan prole.
Bekijk gratis de handleiding van IDIS DC-S6281FX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IDIS |
| Model | DC-S6281FX |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 6373 MB |