IDIS DC-S6281FX handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849/ 49

Afdrukken

Je bekijkt pagina 19 van 49

Part 1 - Remote Setup

19

Day & Night

Congure Day & Night settings.

• B&W Mode: Display the images in greyscale for

greater clarity in low-lighting conditions.

- On/O: Enable/disable B&W Mode.

- Auto: Allow the system to enable/disable B&W

Mode automatically.

- Schedule: Set up a B&W Mode schedule. B&W

Mode is enabled on days and times designated as

Nighttime and disabled at all other times. Select

On or O at the bottom of the schedule table and

then click or drag on the dates and times to select/

unselect as Nighttime. Select On or O and then

click Select All/Clear All to select/unselect all dates

and times as Nighttime.

• IR Cut Filter: IR Cut Filter blocks out the infrared

spectrum. You can ensure clear images at all times by

blocking out the infrared spectrum in high-lighting

conditions and allowing the infrared spectrum to pass

through in low-lighting conditions.

- Nighttime Mode/Daytime Mode: Disables or

enables the IR cut lter.

- Auto: Allow the system to enable/disable IR Cut

Filter automatically.

- Schedule: Sets up the IR cut lter schedule. The

IR cut lter is disabled during the date and time

scheduled as Nighttime and enabled during the

rest. Set up or release Nighttime by selecting On or

O in the bottom and clicking or dragging the date

and time area in the table. Selecting On or O and

clicking the Select All/Clear All button sets up or

releases Nighttime for all dates and time.

• Switching Level: Sets up the switching level between

daytime and nighttime modes. For example, if the

darkness level is set to 3 and the brightness level to

5, the system switches to nighttime mode when in

lighting conditions of level 3 or below and to daytime

mode when in lighting conditions of level 5 or over. It

is recommended that you do not set up the darkness

level and brightness level identically; otherwise, this

function may not work properly. This functions only

when B&W Mode or IR Cut Filter is set to Auto.

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849/ 49

Bekijk gratis de handleiding van IDIS DC-S6281FX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Bewakingscamera