Icron USB 2.0 Ranger handleiding
Handleiding
Je bekijkt pagina 14 van 21
OPTION 2: USB Extender Direct Surface Mounting (using your own hardware)
The bottom of the Ranger 2304GE-LAN enclosures features four pre-drilled holes for optional surface
mounting.
Distance between the enclosure mounting holes:
42.0mm x 77. 0mm
1. Mark the center point of each of the four holes on your mounting surface either by directly measuring or
using a print out of the stencil below.
2. Hardware recommendation: M3.0 locking washers and M3.0 screws (4 of each per extender) noting
screw length will depend upon thickness of mounting surface.
3. Drillthrougheachofthefour-holemarkingsonthemountingsurfaceusinga4.7625mm(3/16”)drillbit.
4. Align the bottom enclosure holes to the newly drilled out holes on the mounting surface.
5. Place a locking washer on each of the four screws and using a screwdriver, fasten the extender into place.
To ensure the stencil below prints to scale be sure to set the page scaling setting to “none”.
42.0mm (1.6535'')
4.8mm (3/16'')
(4 Places)
77.0mm (3.0315'')
mounting hole
Direct Surface Mounting Measurement Stencil
note
13
Bekijk gratis de handleiding van Icron USB 2.0 Ranger, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icron |
| Model | USB 2.0 Ranger |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2295 MB |
