Icron Polaris 7044 handleiding
Handleiding
Je bekijkt pagina 8 van 24
8
Connecting a USB Device and Compatibility
1. Install any software required to operate your USB device. Refer to the documentation for your USB device, as
required.
2. Connect your USB device(s) to the device port on Polaris.
3. Create a routing from a host to that device using API, GUI or test function.
4. Check that the device is detected and installed properly in the operating system.
Polaris 7044 complies with USB 2.0 and USB 3 5Gbps specications governing the design of USB devices. However,
there is no guarantee that all USB devices or hosts will be compatible as there several different characteristics
that may impact the operation of USB devices. The system acts as a single generic hub from the device and host
perspective.
Testing Function
You can use the test/factory reset button to validate the installation. A short press of less than one second will
enter test mode which will cycle through the upstream ports connecting them to all downstream ports after each
subsequent button press. For example, rst button press, Host A goes to Devices 1 through 4; second button press,
Host B goes to Devices 1 through 4, etc. Subsequent button presses should be two seconds or less in duration.
Factory Reset
Factory Reset can be performed via the test/reset button on the front faceplate by holding the button down for 10
seconds. You can also reset the device via API or the web interface. After a factory reset, the device will return to
these default settings.
Default Factory Settings
Default Values:
1. RS232 set to 9600 baud, 8-bit, 1 Stop, No Parity.
2. IP set to Static with the following parameters:
(a) 192.168.0.254
(b) Subnet Mask: 255.255.255.0
(c) Gateway: 192.168.0.1
(d) Port: 23
3. Auto Switching Off
4. GUI, Network API, and RS232 Interfaces Unlocked
Default User Account Credentials:
Username: USER
Password: USER
Default Administrative Account Credentials:
Username: ADMIN
Password: ADMIN
The system’s MAC Address is listed on the bottom enclosure label and varies unit to unit.
Bekijk gratis de handleiding van Icron Polaris 7044, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icron |
| Model | Polaris 7044 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3685 MB |
