Icom MA-510TR handleiding
Handleiding
Je bekijkt pagina 35 van 64
28
6
OTHER FUNCTIONS
6
7
10
15
18
8
13
11
16
9
14
12
17
1
4
2
5
3
■ Navigation
The transponder assists you to navigate to a selected destination.
L The function works only when the transponder is receiving valid GPS signals.
L The function cannot work while in the MOB mode.
NOTE: MA-510TR’s Navigation function is a supplemental aid to navigation only, and is
not intended to be a substitute for primary Navigation equipment.
Using [NAV]:
1. Push [NAV].
• The “WAYPOINT” screen is displayed.
2. Push [▲] or [▼] to select a waypoint.
L Push [◄] to sort the waypoint data by Name.
L Push [►] to sort the waypoint data by Range.
3. Push [ENT] to start navigation.
• The AIS and Highway screen is displayed, and the
transponder starts to navigate.
D Starting navigation
There are 4 ways of setting a destination, using [NAV], selecting in the AIS list, selecting
in the Waypoint list, and selecting on the plotter display.
Selecting in the Waypoint list:
See “Navigating to a waypoint” on page 24 for details.
Selecting in the AIS list:
1. Open the list screen.
[MENU] > AIS list > Target/Danger/Friend list
2. Push [▲] or [▼] to select an AIS target.
3. Push [ENT] to display the Menu window.
• The Menu window is displayed.
4. Select “Navigate to,” and then push [ENT].
• “Start navigation. Are you sure?” is displayed.
5. Select “OK,” and then push [ENT] to start navigation.
• The AIS and Highway screen is displayed, and the
transponder starts to navigate.
Bekijk gratis de handleiding van Icom MA-510TR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | MA-510TR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6294 MB |
