Icom MA-510TR handleiding
Handleiding
Je bekijkt pagina 16 van 64
9
5
BASIC OPERATION
1. Hold down [ ] for 1 second to turn ON the transponder.
• The opening screen is displayed.
2. The result of the self check (ROM, RAM, and backup
data test) is displayed on the opening screen, “OK” or
“failed” (No Good).
• If “failed” is displayed, hold down [ ] for 1 second to
turn OFF the power, and then turn it ON again. If there
is no change, contact your dealer.
• When the language that you use is not set, the
“LANGUAGE” screen is displayed. (p. 36)
L Push [CLR] to skip the setting. If the language is not
set, the transponder displays in English.
• When no MMSI is set, three beeps sound, and “Push
[ENT] to register your MMSI.” is displayed. (p. 4)
3. After the self check is completed, the “Searching
GPS” screen is displayed while searching for a GPS
satellite.
L While searching, you can enter the Menu screen by
pushing [MENU]. (p. 7)
4. When GPS data is received, it is automatically
displayed on the plotter screen.
■ Turning ON the transponder
IMPORTANT: BE SURE to connect a GPS antenna or receiver and a marine VHF
antenna to the transponder before turning ON the transponder. (p. 40)
Bekijk gratis de handleiding van Icom MA-510TR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | MA-510TR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6294 MB |
