Icom IP1100CV handleiding
Handleiding
Je bekijkt pagina 27 van 83
2
SETTING UP THE SYSTEM
2-2
Installation overview
The following shows a typical setting procedure for the WLAN transceiver controller on the IP1100CV Setting
screen.
1 Network Settings > IP Address
Enter the IP address according to your network environment. (Default: 192.168.0.1)
Network Settings > DHCP Server
Enable or disable the Controller’s DHCP server function. (Default: Disable)
2 Transceiver Controller > Transceiver settings > Transceiver Registration
Transceiver Controller > Common Settings
Enter the Transceiver Model, Name and Unit ID, Password and Setting group.
L The default password is “iptrx”. You can change it for security.
L Customize the common settings for the transceiver group (Tenant) on the Common Settings screen.
Setting by the CS-IP100H cloning software or the CS-IP110H programming software
After WLAN transceivers are registered to the Controller, set the wireless LAN settings and provisioning
server settings (Controller) for all the transceivers.
L The CS-IP100H cloning software and CS-IP110H programming software can be downloaded from the Icom
website. Refer to each manual for details.
3 Transceiver Controller > Transceiver settings > Transceiver settings
Set the functions, such as Communication Method (Simplex or Full-Duplex), Priority Call, Area Call,
Message, and Status, for each transceiver.
Enable the required functions for all the WLAN transceivers that are registered on the Transceiver
Registration screen.
• Use ID list • Communication Method (Simplex/Full-Duplex)
• Priority Call • Area Call
• Message • Status
4 Destination Settings > Destination Settings
Assign the registered WLAN transceivers or IP100FS on the Transceiver Registration screen to a group.
The group ID and the communication type are set on the Destination Settings screen.
(☞ Continued on the next page)
NOTE: Applying the settings to the WLAN transceiver
If the Controller’s setup has been changed, be sure to restart the transceiver to apply the setting.
Bekijk gratis de handleiding van Icom IP1100CV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IP1100CV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9942 MB |
