Icom ID-52E PLUS handleiding
Handleiding
Je bekijkt pagina 18 van 88
5
BASIC MANUAL
2
INITIAL SETUP
Before starting using the transceiver, follow these steps for the initial setup.
STEP 1
Attaching the battery pack and charging the battery. (pp. 5, 6)
STEP 2
Inserting a microSD card. (p. 7)
STEP 3
Turning ON the transceiver. (p. 7)
STEP 4
Adjusting the audio level. (p. 7)
STEP 5
Saving your initial setting onto a microSD card. (p. 8)
STEP 6
Conrming the GPS signal receiving. (p. 10)
STEP 7
* Entering your Call sign (MY) into the transceiver. (p. 45)
STEP 8
* Registering your call sign at a Gateway repeater. (p. 47)
► You have completed the steps!!
* You can skip the steps if you do not plan to operate D-STAR right now.
■ Attaching the Battery pack
Attach or detach the battery pack or battery case, as illustrated below.
L When attaching, slide the battery pack and hold it down until the both latches are locked.
1
1
2
2
1
Battery pack or
battery case
L Illustrations are when using the battery pack.
NOTE:
• Even when the transceiver is OFF, a slight current still ows in the circuits. Remove the
battery pack or case from the transceiver when not using it for a long time. Otherwise, the
attached battery pack or case will become exhausted, and will need to be recharged or
replaced.
• When the temperature is around 0°C (32°F) or below, the Battery Protection function
automatically sets the transceiver power to Low1 power (0.5 W), and disables power
selections High, Mid, and Low2.
To attach To detach
Bekijk gratis de handleiding van Icom ID-52E PLUS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | ID-52E PLUS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9741 MB |
