Icom IC-T10 handleiding
Handleiding
Je bekijkt pagina 43 van 48
6
OTHER FUNCTIONS
6-12
Resetting
If the transceiver has a malfunction caused by an external factor such as static electricity, reset it using the Partial
Reset or All Reset function�
BE CAREFUL! An All Reset clears all programming and returns all settings to the factory defaults�
D Partial Reset
1� Rotate [VOL] counter-clockwise to turn OFF the
transceiver�
2� While holding down [H/M/L], rotate [VOL]
clockwise to turn ON the transceiver�
• “Icom” and the voltage are displayed, and then the
operating frequency is displayed�
TIP: A Partial Reset resets the operating settings to
their defaults without clearing the following:
• Memory Channel contents
• Scan Edge contents
• Call Channel contents
• DTMF memory contents
• Home Channel settings
D All Reset
1� Rotate [VOL] counter-clockwise to turn OFF the
transceiver�
2� While holding down [SET], [BAND], and [H/M/L],
rotate [VOL] clockwise to turn ON the transceiver�
• “CLEAR,” “Icom,” and the voltage are displayed, and
then the operating frequency is displayed�
Bekijk gratis de handleiding van Icom IC-T10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-T10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
