Icom IC-T10 handleiding
Handleiding
Je bekijkt pagina 34 van 48
6
OTHER FUNCTIONS
6-3
Transmitting a DTMF code
The transceiver has two ways of transmitting a DTMF
code sequence�
D Using a DTMF memory channel
Transmit the DTMF memory contents (p� 6-2)�
1� Push [SET] to enter the Set mode�
• A Set mode item is displayed�
2� Repeatedly push [SET] to select “dtmF-t�”
3� Rotate [DIAL] to select “mEm�”
4� Push [V/M/C] to exit the Set mode�
5� While holding down [PTT], push DTMF channel
numbers shown below to transmit�
DTMF memory channel number assignment
dB
dA
dE
dC
dD
d0 ~ d9
dF
D Manual DTMF code transmission
Transmit the DTMF code that you manually entered
using the Ten-keypad�
1� Push [SET] to enter the Set mode�
• A Set mode item is displayed�
2� Repeatedly push [SET] to select “dtmF-t�”
3� Rotate [DIAL] to select “kEy�”
4� Push [V/M/C] to exit the Set mode�
5� While holding down [PTT], push the keys shown
below to manually transmit a DTMF code
sequence�
DTMF code assignment
B
A
*(E)
C
D
0 ~ 9
# (F)
TIP: About the 1750 Hz tone
When you select “t-CALL” in step 3, a 1750 Hz tone
can be transmitted�
z While holding down [PTT], push [MONI] to transmit.
L You can hear the 1750 Hz tone from a speaker.
Bekijk gratis de handleiding van Icom IC-T10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-T10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
