Icom IC-T10 handleiding
Handleiding
Je bekijkt pagina 31 van 48
5
SET MODE
5-9
Initial Set Mode items
Voltage indication (Default: On)
Selects whether or not to display the battery voltage
while turning ON the transceiver�
• OFF: The transceiver does not display the
battery voltage�
• On: The transceiver displays the battery
voltage�
Auto low power (Default: OFF)
Selects whether or not to enable the Auto Low Power
function�
• OFF: Turns OFF the function�
• On: When the temperature goes
below 0˚C (32˚F), the transceiver
automatically sets the all output
power to low�
L High or Mid power are disabled�
Tone burst (Default: OFF)
Selects whether or not to enable the Tone Burst
function when using the Tone Squelch function�
• OFF: When you transmit a signal that
superimposes the CTCSS tone, the
other stations may hear a short burst
of noise from their receiver, just after
you stop transmitting�
• On: When you transmit a signal that
superimposes the CTCSS tone, the
function mutes the noise from being
heard in the other station receiver�
Earphone antenna (Default: OFF)
Selects whether or not to use the earphone antenna
for FM radio�
• OFF: An earphone antenna is not used�
• On: An earphone antenna is used�
Monitor (Default: PUSH)
Selects how to use the Monitor function�
• PUSH: Hold down [MONI] to monitor
the frequency� Release to stop
monitoring�
• HOLd: Push [MONI] momentarily to monitor
the frequency and push momentarily
again to cancel it�
Bekijk gratis de handleiding van Icom IC-T10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-T10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
