Icom IC-T10 handleiding
Handleiding
Je bekijkt pagina 26 van 48
5
SET MODE
5-4
Set Mode items
Frequency oset (Default: 0�600*)
Sets the dierence between the transmit and receive
frequencies for Repeater operation or Duplex
operation�
• Range:
Set to between 0�000 and 20�000 (MHz)�
* The default value may dier, depending
on the frequency band�
Duplex reverse (Default: OFF)
Selects whether or not to reverse the Duplex
frequency�
• OFF: Normal Duplex communications�
• On: Reverse the Duplex frequency�
Tuning step (Default: 5�0*)
Selects a tuning step� In the VFO mode, when you
select the operating frequency by rotating [DIAL], the
frequency changes in this selected tuning step�
It also applied for a VFO scan�
• Options: 5�0, 10�0, 12�5, 15�0, 20�0, 25�0, 30�0,
50�0, 100�0, 125�0, and 200�0 (kHz)
* A default value may dier, depending
on the transceiver version�
Priority scan (Default: OFF)
Selects whether or not to enable the Priority Scan
function and Priority Bell�
• OFF: Turns OFF the function�
• On: Turn ON the function�
• bELL: When a signal is received while
operating the Priority Scan, a bell
sounds and “
” blinks�
Tone scan (Default: OFF)
Selects whether or not to enable the Tone Scan
function�
• OFF: Turns OFF the function�
• On: Detects the Tone frequency or
DTCS code used by the transceiver
that communicates using the Tone
Squelch function�
Pause timer (Default: 15)
Selects a Scan Pause Timer� When a signal is
received during a scan, the scan pauses for the set
period of time, and then resumes�
• 5: The scan pauses for 5 seconds, and
then resumes�
• 10: The scan pauses for 10 seconds, and
then resumes�
• 15: The scan pauses for 15 seconds, and
then resumes�
• P-2: The scan pauses until the received
signal disappears, and then resumes
after 2 seconds�
Program skip scan (Default: On)
Selects whether or not to enable the Program Skip
Scan function for a VFO mode scan�
This function enables the transceiver to skip the
unwanted frequencies that are entered as a Memory
channel and are set to “PSKIP�”
• OFF: The transceiver scans all
frequencies�
• On: The transceiver does not scan
frequencies set as “PSKIP”
frequencies�
Bekijk gratis de handleiding van Icom IC-T10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-T10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
