Icom IC-T10 handleiding
Handleiding
Je bekijkt pagina 24 van 48
5
SET MODE
5-2
Using Set Mode
You can use the Set mode to set infrequently changed values or function settings� The transceiver has two types of
Set modes, as shown below�
D Using the Basic Set mode
Example: Selecting a 20 kHz tuning step
1� Push [SET] to enter the Set mode�
• A Set mode item is displayed�
2� Push [SET] several times to select “tS�”
L Alternatively, you can also push [MONI] or [P] to select
“tS”
3� Rotate [DIAL] to select “20�0�”
4� Push [V/M/C] or [ENT] to exit the Set mode�
D Using the Initial Set mode
Example: Setting the Auto Power OFF Timer to 30
minutes
1� Rotate [VOL] counter-clockwise to turn OFF the
transceiver�
2� While holding down [SET], rotate [VOL] clockwise
to turn ON the transceiver�
• An Initial Set mode item is displayed�
3� Push [SET] several times to select “AP OFF�”
4� Rotate [DIAL] to select “30�”
5� Push [V/M/C] or [ENT] to exit the Initial Set mode�
Bekijk gratis de handleiding van Icom IC-T10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-T10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
