Icom IC-T10 handleiding
Handleiding
Je bekijkt pagina 10 van 48
2
MEMORY OPERATION
2-3
Selecting a Call channel
Call channels are used for quick recall of most often
used operating frequencies�
1� Repeatedly push [V/M/C] to select the Call
Channel mode�
2� Push [BAND] to toggle between the VHF call
channel and UHF call channel�
Entering Memory channels
Example: Entering 145.800 MHz into Channel 11
1� Repeatedly push [V/M/C] to select the VFO mode�
2� Repeatedly push [BAND] to select the VHF band�
3� Set the frequency to 145�800 MHz�
4� Push [S�MW] until two short beeps sound�
• “ ” and the channel number blink�
L Holding down even after two short beeps sound
writes the set frequency to the currently selected
channel�
5� Rotate [DIAL] to select Channel 11�
6� Push [S�MW] until two short beeps sound to enter
145�800 MHz to Channel 11�
• The transceiver returns to the VFO mode�
TIP: About the Auto Increment
When entering the frequency to the Memory
Channel in Step 6, hold down [S�MW] until three
beeps sound, to write to the previous channel of the
selected channel�
Bekijk gratis de handleiding van Icom IC-T10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-T10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
