Ices IBT-6 handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152/ 52

Afdrukken

Je bekijkt pagina 6 van 52

5

Setting up the speaker tower -Attaching the base

1. Take the tower body and base carefully out of the packaging.

2. Take the screws and washers out.

3. Attach the base to the body aligning the holes on the base with the holes on the

tower.

4. Screw the base onto the main unit.

5. Place the tower upright on the floor and it is now ready to use

Power setup

Connect the AC/DC adapter to the DC in socket on the speaker back panel and plug the

adaptor into the mains socket.

Using the remote control

The battery

To get your remote control working intially, pull the clear tab from

the battery compartment located at the bottom of the remote.

If your remote becomes intermittent or you find you have to move

closer the unit to operate, then probably the batteries need to be

replaced.

To replace the batteries, slide the holder out from the base of the

remote. Remove the battery and replace with a 3 volt Lithium

CR2025.

WARNING !

Do not ingest the battery , Chemical Burn Hazard

(The remote control supplied with) This product contains a coin/button cell battery.

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152/ 52

Bekijk gratis de handleiding van Ices IBT-6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Speaker