Ibiza Sound SIGMA40 handleiding
Handleiding
Je bekijkt pagina 4 van 30
MANUAL - SIGMA40
4
©Copyright LOTRONIC 2024
6. LED effect selection button & LED ON/OFF
7. MODE/TWS/BASS BOOST key
8. Previous Track / VOL – button
9. Play/Pause/MIC VOL adjustment button
10. Next Track / VOL+ button
11. AUX input
OPERATING INSTRUCTIONS
POWER ON/OFF
Slide the On/O switch to the ON position to turn the product on and back to the OFF position to turn it o.
INPUT SOURCE CHANGE
Short press the MODE button on the product to switch between wireless audio / USB / MicroSD / AUX source.
VOLUME ADJUSTMENT
Long press the VOL+ or VOL – buttons on the product to adjust the volume.
BASS BOOST
Double-click on MODE button to activate/deactivate the function that allows you to increase the bass level.
LED EFFECT SELECTION
After turning on the product, you can press the "LED" key several times to change the eect of the LED lights
and to turn them o/on. 9 dierent eects are available .
WIRELESS AUDIO FUNCTION
The product supports music playback via wireless connection to a smartphone or any other compatible device.
NOTE : Compatibility with all devices on the market cannot be guaranteed.
WIRELESS AUDIO CONNECTION
• Turn on the speaker, select the wireless audio source using the MODE key and activate the BT audio function
on the external device.
• Select "SIGMA40" on the external device.
• Once paired, you can start playback from the external device.
• During music playback, you can short press the Play/Pause button on the product to pause playback. To re-
sume playback, press the Play/Pause button again.
TWS FUNCTION (TRUE WIRELESS STEREO)
If you have two speakers, you can activate the TWS function which allows you to pair two speakers together
and obtain Stereo audio playback (the speakers will play the same audio at the same time).
Note: in order to use the TWS function, the two speakers must have a maximum distance of about 5 meters from each other
in open spaces.
TWS FUNCTION ACTIVATION (HOW TO ASSOCIATE TWO SPEAKERS TOGETHER)
• Make sure the speakers are not paired with any external devices.
• Turn on both speakers and select Bluetooth mode .
• Long press the “MODE” key on one speaker to start TWS pairing, a sound will conrm pairing.
• Once paired, the speakers will automatically pair with each other if turned on at the same time.
• To deactivate the TWS function and unpair the speakers, long press the "TWS" button on the speaker after
pairing.
USB/ MICROSD FUNCTION
Insert a MicroSD card (containing songs in MP3 format) into the slot after turning on the speaker. Playback will
start automatically.
Short press the “Play/Pause” button to pause/resume playback.
Briey press the “Next Track” / “Previous Track” buttons to skip to the next track / return to the previous track.
NOTE:
Compatibility with all commercially available storage devices cannot be guaranteed.
External USB devices that require a voltage rating greater than 5V and a current rating greater than 200mA are not supported .
If you use a USB extension cable, the connected storage device may not be recognized or function properly.
Use only storage devices formatted with FAT16/FAT32 le system .
Bekijk gratis de handleiding van Ibiza Sound SIGMA40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ibiza Sound |
| Model | SIGMA40 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 3548 MB |
