Ibiza Sound SCAN500RGB handleiding
Handleiding
Je bekijkt pagina 4 van 28
MANUAL - SCAN Laser Systems
4
©Copyright LOTRONIC 2021
Console Light1 Light2 Light3
DESCRIPTION
1. Built-in performance programs, AUTO, SOUND
2. DMX mode
3. Master/Slave
4. ILDA DB25 mode (only SCAN110RGB & SCAN2000RGB)
CONTROLS & FUNCTIONS
FUNC
Mode/Function: Set the operating mode of laser.
ENTER
: Conrms all settings or changes of LED control panel.
UP
/
DOWN
: Changes the operating mode, parameter or DMX address.
OPERATION DESCRIPTION:
SET THE FUNCTION OVERVIEW:
[FUNCTION] key:
At every short press on the FUNC button, following actions are active :
• INDR - DMX (5-CH simplied DMX mode) + you can set the DMX address via the UP/DOWN buttons and conrm
with ENTER
• DMX (34-CH advanced DMX mode) + you can set the DMX address via the UP/DOWN buttons and conrm with
ENTER
• INDR SE (1 – 2 – 3) = 3 AUTO or sound-controlled mode. The ENTER button toggles between these 2 modes
(SND is displayed)
The SE 1 sequence (beam/tunnels, waves mode) – SE 2 (animation 1) – SE 3 is accessible via the sub-menu.
To access the sub menu keep the FUNC button pressed for at least 3 seconds. SET is displayed on the bottom
right side of the display. You are now in the setting menu.
Select the sequence by selecting SE and press ENTER.
This sub-menu also allows to (not recommended for beginners!)
• Congure motors X & Y via dr – X and dr – Y
• Invert motors (SWAP XY)
• Set the projection size (X-SIZ with values from 0 to 100 and Y-SIZE with values from 0 to 100)
• Activate/deactivate the remote control ( REMOTE – ON/OFF)
To leave the menu, keep FUNC pressed.
Bekijk gratis de handleiding van Ibiza Sound SCAN500RGB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ibiza Sound |
| Model | SCAN500RGB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4330 MB |
