Ibiza Sound BIGPAR-27RGBW handleiding
Handleiding
Je bekijkt pagina 4 van 26
MANUAL - BIGPAR-27RGBW
4
©Copyright LOTRONIC 2022
facturer or his service agent or a similar qualied person in order to avoid a hazard.
• The light source of this luminaire is not replaceable. When it reaches the end of its life time, the whole unit
must be discarded.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
FUSE REPLACEMENT
Locate and remove the unit’s power cord. Once the cord has been removed located the fuse holder located in-
side the power socket. Insert a at-head screw driver into the power socket and gently pry out the fuse holder.
Remove the bad fuse and replace with a new one.
Warning: If after replacing the fuse you continue to blow fuses, STOP using the unit. Contact customer support
for further instructions. Continuing to use the unit may cause serious damage.
INSTALLATION
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is rmly xed to
avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the
unit is secure and able to support a weight of 10 times of the unit’s weight.
LED DISPLAY
The LED display has 4 buttons: MENU / UP / DOWN / ENTER
MENU: Press to nd an operation mode or to leave the current menu option.
UP: Press to scroll upwards through the list of options or set a higher value.
DOWN: Press to scroll downwards through the list of options or to set a lower value
ENTER: Press to activate a menu option or a selected value
DMX IN: Connect a 3-pin XLR connector from the DMX controller to this input
DMX OUT: Connect a 3-pin XLR connector from this output to the DMX input of
another DMX controlled unit
POWER IN: Connect the supplied mains lead to this input and the other end to an
appropriate wall outlet
POWER OUT: Connect a IEC power lead from this output to the POWER INPUT of the following BIGPAR. You can
connect up to 10 BIGPAR maximum.
DMX CHANNEL DESCRIPTION
No. Display Function Description
1 d001 Address code: 001-512
2
8Ch 8 / 4 channel selection
4Ch
3
Au01 Au01- Au08 Fixed color selection
------
Au08
Au09 Au09 Jump
Au10 Au10 Gradient
So01 So01 Sound 1
So02 So02 Sound 2
4
St00 St00 No strobe
St01 St01-St16 Strobe from slow to fast
------
St16
5
SP00
SP01
------
SP16
SP00
SP01-SP16 Auto speed from slow to fast
MENU
UP
DOWN
ENTER
DMX512
INPUT
DMX512
OUTPUT
POWER OUT
POWER IN
Bekijk gratis de handleiding van Ibiza Sound BIGPAR-27RGBW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ibiza Sound |
| Model | BIGPAR-27RGBW |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3623 MB |
