I-PRO WV-X67301-Z4L3 handleiding
Handleiding
Je bekijkt pagina 36 van 56
Up-to-date versions of software may contain modifications to specific problems.
6. Other
6.1 Initialize
The INITIAL SW (Initial switch) can be turned ON to initialize the body. For the position of the
INITIAL SW (Initial switch), refer to the following.
→Button
1. Turn off the power of this product.
2. Turn on the power of this product while pressing the INITIAL SW (Initial switch).
3. Press the INITIAL SW (Initial switch) for 15 seconds or longer after the power is turned on.
4. Release the INITIAL SW (Initial switch)
・ Approximately two minutes later, this product is started and the settings containing the
network settings are initialized. If it does not start normally, try again.
6.2 Check the software version
The functions of this product are implemented in software. We recommend that you first check the
current software version if there is a problem with the operation of this product.
➣ Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]>
[Maintenance] of the Advanced menus on the left>Clicking on the [Upgrade] tabs displays
the versioning window.
1. Check software versions with [Firmware version]
・ The current software version can be checked.
6. Other
6.2 Check the software version
32
Bekijk gratis de handleiding van I-PRO WV-X67301-Z4L3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | I-PRO |
| Model | WV-X67301-Z4L3 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8407 MB |
