I-PRO WV-X67301-Z4L3 handleiding
Handleiding
Je bekijkt pagina 18 van 56
・[Washer] can be selected only when [Washer control] is set in [Relay output] on
[Basic] > [Basic] tab of Live image pages Settings panel > [Detailed setting] >
[Camera detailed setting] > Advanced menu on the left. At that time, the [Washer
control] link is displayed in the item.
・During washer operations, [Wiper] [Start] and [Stop], pan/tilt/zoom/focus
control, [Auto mode] [Start], preset action, and Settings in [Image/Position] Tab
cannot be operated.
・When [Continuous:High] or [Continuous:Low] is selected and the [Start] button
is clicked, the wiper will stop after a maximum of 5 minutes from when the [Start]
button was clicked.
・During pan/tilt/zoom controls, [Start] may not be able to be operated for the
washer.
・If the wiper or washer operations are started during auto tracking operations, the
wiper may be detected and tracked.
・Refer to the User Manual for instructions on details on each setting method of
[Washer control]
[Continuous:High]
The wiper wipes the front glass once every 6 seconds.
[Continuous:Low]
The wiper wipes the front glass once every 11 seconds.
[1shot]
The wiper wipes the front glass 4 times.
[Washer]
Install a washer nozzle on the camera body. Spray washer liquid on the front glass from the
installed washer nozzle and wipe it off automatically with a wiper.
3. Set the camera
3.7 Set up Wiper
14
Bekijk gratis de handleiding van I-PRO WV-X67301-Z4L3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | I-PRO |
| Model | WV-X67301-Z4L3 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8407 MB |
