I-PRO WV-U11550-V3 handleiding
Handleiding
Je bekijkt pagina 31 van 49
Up-to-date versions of software may contain modifications to specific problems.
6. Other
6.1 Initialize
INITIAL SETPress the button to initialize the unit.INITIAL SETFor the location of the buttons,
refer to the following:
→Button
1. Turn off the power of this product.
2. Turn on the power of this product while pressing the [INITIAL SET] button.
3. Press the [INITIAL SET] button for 15 seconds or longer after the power is turned on.
4. Release the INITIAL SET button
・ Approximately two minutes later, this product is started and the settings containing the
network settings are initialized. If it does not start normally, try again.
6.2 Check the software version
The functions of this product are implemented in software. We recommend that you first check the
current software version if there is a problem with the operation of this product.
➣ Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]>
[Maintenance] of the Advanced menus on the left>Clicking on the [Upgrade] tabs displays
the versioning window.
1. Check software versions with [Firmware version]
・ The current software version can be checked.
6. Other
6.2 Check the software version
27
Bekijk gratis de handleiding van I-PRO WV-U11550-V3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | I-PRO |
| Model | WV-U11550-V3 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 7580 MB |
