Handleiding
Je bekijkt pagina 43 van 94
43
Note: The illustration is a reference image, your device may differ.
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant
standard, or a single-pole circuit breaker.
The appliance has a large power rating and must be connected to
electricity by a Qualified Electrician.
Notes:
1. If the cable is damaged or needs replacing, this should be done by an after-
sales technician using the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omni
polar circuit breaker must be installed with a minimum gap of 3mm between
the contacts.
3. The installer must ensure that the correct electrical connection has been
made and that it complies with safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by qualified
technician.
Cautions
1. The hob must be installed by qualified personnel or technicians.
Please never conduct the operation by yourself.
2. The electric hob shall not be mounted to cooling equipment, dishwashers and
rotary dryers.
3. The electric hob shall be installed such that better heat radiation can be
ensured to enhance its reliability.
4. The wall and induced heating zone above the work surface shall withstand
heat.
5. To avoid any damage, the sandwich layer and adhesive must be heat
resistant.
6. A steam cleaner is not to be used.
7. This electric hob can be connected only to a supply with system impedance
no more than 0.427 ohm. In case necessary, please consult your supply
authority for system impedance information.
Bekijk gratis de handleiding van Hyundai HV3600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hyundai |
| Model | HV3600 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4000 MB |
