Hyundai HLM 32TS554 SMART handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283/ 83

Afdrukken

Je bekijkt pagina 56 van 83

English - 16 -

Network Menu Content

Network Type

Disable the network connection or change the connection type.

Scan Wireless

Networks

Start a search for wireless networks. This option will be available if the Network Type

is set as Wireless Device.

Disconnect

To disconnect from a wireless network and delete your saved wireless network profile (if

previously saved), highlight this option and press OK. This option will not be available

if you did not connect to a wireless network. Refer to Connectivity section for more

information.

Press WPS on your

wifi router

If your modem/router device has WPS, you can directly connect to it using this option.

Highlight this option and press OK. Go to your modem/router device and press the

WPS button on it to make the connection. This option will be available if the Network

Type is set as Wireless Device.

Internet Speed Test

Start a speed test to check your connection bandwidth. The result will be displayed on

the screen when finished.

Advanced Settings

Change the IP and DNS configurations of your TV.

Networked Standby

Mode

Enable or disable this feature by setting it as On or Off.

Note: A wireless LAN adaptor (WLAN USB dongle) is required to use wireless network features. The wireless adaptor is not supplied with the

unit, it can be purchased separately. For more information contact your local dealer or retail outlet where you bought your TV. For detailed

information on the options of this menu refer to the Connectivity section.

Installation Menu Content

Automatic channel

scan (Retune)

Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.

D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores

analogue stations. 6DWHOOඈWH6HDUFKHVDQGVWRUHVVDWHOOඈWHVWDWඈRQV

Manual channel

scan

This feature can be used for direct broadcast entry.

Network channel

scan

Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial

network channels. D. Cable: Searches for cable network channels. Satellite: Searches

for satellite network channels.

Analogue fine tune

You can use this setting for fine tuning analogue channels. This feature is not available

if no analogue channels are stored and if currently watched channel is not an analogue

channel.

Satellite Settings

Displays satellite settings. Satellite list: Displays available satellites. You can Add,

Delete satellites or Edit satellite settings on the list. Antenna installation: You can

change satellite antenna settings and/or start a satellite scan.

Installation Settings

(optional)

Displays installation settings menu. Standby Mode Search (*): Your TV will search for

new or missing channels while in standby. Any new found broadcasts will be shown.

Dynamic Channel Update(*): If this option is set as Enabled, the changes on the

broadcasts such as frequency, channel name, subtitle language etc., will be applied

automatically while watching.

(*) Availability depends on model.

Clear Service List

Use this setting to clear channels stored. This setting is visible only when the Country

option is set to Denmark, Sweden, Norway or Finland.

Select Active

Network

This setting allows you to select only the broadcasts within the selected network to be

listed in the channel list. This feature is available only for the country option of Norway.

Signal Information

You can use this menu item to monitor signal related information such as signal level/

quality, network name etc for available frequencies.

First time installation

Deletes all stored channels and settings, resets TV to factory settings.

English - 17 -

System Menu Content

Accessibility

Displays accessibility options of the TV.

High Contrast

Increase the contrast of the menu options and texts to make them easier to read. White

Text, Yellow Text and Off options will be available.

Hard of Hearing

Enables any special feature sent from the broadcaster.

Audio

Description

A narration track will be played for the blind or visually impaired audience. Press OK to

see all available Audio Description menu options. This feature is available only if the

broadcaster supports it.

Dialogue

Enhancement

This feature provides sound post-processing options for speech-gated dialogue

enhancement. Off, Low, Medium and High options will be available. Set according

your preference.

Note: This feature has an effect only if input audio format is AC-4 and this effect only applies to TV loudspeaker

output.

Spoken Subtitles

Default preference of spoken subtitles is selected with this setting option. To make spoken

subtitles priority higher than normal ones, this option should be set to On.

This option may not be available depending on the model of your TV and is only visible

when the source is set to TV.

Magnification

Enables the use of button combinations to magnify the screen. On and Off options

will be available. Set as On to enable.

Magnification support will be enabled or disabled with long-press of the numeric button

. First top-left quadrant of the screen will be zoomed. After the magnification support

is enabled, long-press of the numeric buttons 2, 4, 6, 8 will move the zoomed area to

up, left, right and down.

Minimap

Minimap is enabled and deactivated by default. It will be activated when Magnification

feature is enabled. With this option, you can prevent magnification feature from displaying

the minimap.

Click Sound

This option enables the key click sound on TV menu. Set to On to enable.

Highlight

programmes

with

[S] Subtitle

If this option is enabled and if any electronic programme guide event has "Subtitle" access

service, this events will be highlighted with another colour.

[SL] Sign

Language

If this option is enabled and if any electronic programme guide event has "Sign Language"

access service, this events will be highlighted with another colour.

[AD] Audio

Description

If this option is enabled and if any electronic programme guide event has "Audio

Description" access service, this events will be highlighted with another colour.

Language

You may set a different language depending on the broadcaster and the country.

Conditional Access

Controls conditional access modules when available.

Privacy

Privacy Settings

Manage your privacy privileges for smart TV related applications. Press OK to enter the

menu and set according to your preferences.

Show All Coo-

NඈHV

'ඈVSOD\VDOOVDYHGFRRNඈHV

Delete All Co-

RNඈHV

'HOHWHVDOOVDYHGFRRNඈHV

Do Not Track

You can set your preference regarding the tracking behaviour for HbbTV services using

this option.

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283/ 83

Bekijk gratis de handleiding van Hyundai HLM 32TS554 SMART, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Televisie