Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 99 van 240
Gas system 7
Exsis I/T - 01/23-1 - EHG-0027-02EN 99
Only connect a gas appliance to the external gas connection. Do not
use the external gas connection as supply (connection of an additional
gas bottle).
Do not use the external gas connection to fill gas bottles. Observe the
information stickers on the external gas connection.
Fig. 90 External gas connection
(gas isolator tap closed)
The external gas connection is located at the rear or to the left or right of the
vehicle depending on the model.
◼ Connect the external gas device to the connection point (Fig. 90,1).
◼ Open the gas isolator tap (Fig. 90,2).
7.5 Gas bottle compartment pull-out
To facilitate the changing of gas bottles, the gas bottles and the DuoControl
switching facility are stored in an extractable gas bottle compartment.
Fig. 91 Gas bottle compartment
pull-out
Fig. 92 Knob with locking device
◼ Open flap (Fig. 91,2) for the gas bottle compartment.
◼ Pull the knob (Fig. 92,1) upwards. The gas bottle compartment pull-out
is unlocked.
◼ Pull out the gas bottle compartment pull-out (Fig. 91,1) until the knob
engages again. Now, the gas bottle compartment pull-out is locked in
this position.
◼ Change the gas bottle as described in section 7.6.
Pulling out the gas bottle
compartment:
Changing the gas bottle:
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
