Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 83 van 240
Living 6
Exsis I/T - 01/23-1 - EHG-0027-02EN 83
◼ Lift the front of the table top (Fig. 66,6) by approx. 45°.
◼ Pull out the lower part of the support leg (Fig. 66,4) down and lay aside.
◼ Remove the table top from the upper retainer.
◼ Hook the table top at a 45° angle to the supports into the lower retainer
(Fig. 66,3) and place on the floor with the upper part of the support leg
(Fig. 66,5).
6.10 TV unit
Before commencing the journey, bring the flat screen and screen
holder into the driving position.
The information about the operation of the TV unit can be obtained in the
manufacturer's instruction manual.
6.10.1 Positioning the flat screen
The flat screen is secured on the side by a guide rail (Fig. 67,1).
Fig. 67 Flat screen
◼ Press the release button (Fig. 67,2).
◼ Pull flat screen out of the guide rail (Fig. 67,1), into the desired position.
◼ Take hold of the flat screen at the top and bottom edge and tilt it as de-
sired.
◼ Take hold of the flat screen at the top and bottom edge and move it into
the straight position.
◼ Push flat screen back until it engages in the guide rail (Fig. 67,1) on the
side.
Conversion into bed
foundation:
Flat screen, integrable
Positioning the flat screen:
Bringing the flat screen into
the initial position:
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
