Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 23 van 240
Before the journey 3
Exsis I/T - 01/23-1 - EHG-0027-02EN 23
The mass in running order is the weight of the ready-to-drive series vehicle
(excluding optional equipment fitted at the factory).
The mass in running order is made up as follows:
⚫ Unladen weight (mass of the empty vehicle) with factory-installed stand-
ard equipment (excluding optional equipment fitted at the factory)
⚫ Driver's weight
⚫ Basic equipment weight
⚫ Greases, oils and cooling liquids filled in
⚫ Fresh water tank filled up to 100 %
⚫ Aluminium gas bottle filled up to 100 %
⚫ Fuel tank filled to 90 %
75 kg are calculated for the weight of the driver, regardless of how much the
driver really weighs.
Basic equipment includes all equipment and fluids required for safe and
proper vehicle use. The weight of the basic equipment includes:
⚫ A full fresh water system
⚫ A full heating system
⚫ The power cables for the 230 V power supply
⚫ A full toilet flushing system
⚫ The installation kit for an auxiliary battery if an auxiliary battery can be
used
The waste water and sewage tanks are empty.
Example for calculating
the basic equipment
Water tank with 20 l (during the journey)
20 kg
Gas bottle (11 kg
gas
+ 14 kg
bottle
)
+ 25 kg
Boiler with 12 l
+ 12 kg
230 V power cable
+ 4 kg
Installation kit for auxiliary battery
+ 20 kg
Total
= 81 kg
The mass in running order and the actual vehicle mass are specified by the
manufacturer in the vehicle documents.
To determine the remaining load capacity, it is important that you know the
actual weighed mass of your vehicle. Upon completion of your vehicle,
therefore, we determine the actual weight of your vehicle for the first time by
weighing it at the end of the line. This includes the mass in running order
plus the weight of all ordered and factory-fitted optional equipment.
You can use this actual weighed mass to calculate the remaining load ca-
pacity for baggage or other accessories.
Example:
Technically permissible gross weight − actual weighed mass − mass of pas-
sengers = remaining load capacity
3500 kg – 3000 kg – 225 kg (3 x 75 kg) = 275 kg
Please note that the factory calculation of the remaining load capacity for
the mass of the driver (included in the actual weighed mass) and the
mass of the passengers is based on a generalized mass of 75 kg per
seat. Due to deviating body weights, however, the actual remaining load
capacity of your vehicle may vary.
Mass in running order
Remaining load capacity
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
