Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 213 van 240
Troubleshooting 14
Exsis I/T - 01/23-1 - EHG-0027-02EN 213
14 Troubleshooting
Chapter overview
This chapter contains instructions about possible faults in your vehicle.
The faults are listed with their possible causes and corresponding remedies.
The specified faults can be remedied with relative ease and without a great
deal of specialised knowledge. In the event that the remedies detailed in this
instruction manual should not be successful, an authorised specialist work-
shop must find and eliminate the cause of the fault.
14.1 Braking system
Have defects on the braking system immediately remedied by an au-
thorised specialist workshop.
14.2 Electrical system
When the living area battery is changed, only use batteries of the same
type and the same capacity.
See chapter 8 for changing the fuses.
Fault
Cause
Remedy
Road light system does
no longer work correctly
Bulb is defective
Replace bulb. Note volts and
watts specifications
Fuse is defective
Replace fuse
Interior lighting does not
work
Illuminant, plug con-
nector or cable faulty
Contact customer service
The electrically operated
entrance step cannot be
moved in or out
Fuse on the trans-
former/rectifier is defec-
tive
Replace fuse on the trans-
former/rectifier
The entrance step does
not extend or only
partially (in the winter)
The mechanics are iced
up
The protection device
(pinch protection) has
triggered due to a over-
load current
Clean the entrance step, re-
move ice
No 230 V power supply in
spite of connection
230 V automatic circuit
breaker has triggered
Switch on 230 V automatic
circuit breaker
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
