Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 21 van 240
Before the journey 3
Exsis I/T - 01/23-1 - EHG-0027-02EN 21
3 Before the journey
Chapter overview
This chapter contains important information which has to be noted before
commencing your journey or carrying out any tasks before the journey.
At the end of the chapter there is a checklist which once again summarises
the most important points.
3.1 Initial start-up
During the initial journey and each time after changing a wheel, re-
tighten the wheel bolts/wheel nuts after 50 km (30 miles). Subsequently
inspect them at regular intervals in order to ensure that they are firmly
seated. See chapter 13 for tightening torque.
The motorhome is supplied with a set of keys, consisting of keys for the
base vehicle and keys for the body.
Always deposit a replacement key outside the vehicle. Make a note of the
key number. Our authorised dealers and workshops can offer assistance in
case of loss.
Further information in chapter 12.
When starting up for the first time or after a lay-up, the electrical system
must be started up as follows:
◼ Switch on the fuses or (if the fuses have been pulled out) insert the
fuses.
◼ Set battery cut-off switch to on.
◼ Switch 12 V power supply on.
The 12 V power supply must only be switched on in vehicles without
SCU (System Control Unit). On vehicles with SCU, the 12 V power sup-
ply is activated automatically.
The vehicle is not ready for operation until the above measures have
been carried out.
3.2 Vehicle load capacity
Overloading the vehicle and the axles may result, for example, in a di-
minished steering response (altered driving behavior), an overloading
of the tires, and, as a result, an increased risk of tire blowouts or an
extended braking distance. This may cause you to lose control of the
vehicle, endangering yourself and other road users.
If you are not sure whether the loaded vehicle complies with the tech-
nically permissible maximum laden mass, you can weigh/check the
vehicle on public scales or have it weighed by certain dealers.
The vehicle documents state the technically permissible maximum
laden mass or the mass including optional equipment ex works (actual
vehicle mass), but not the weight of the laden vehicle (see sec-
tion 3.2.1). For your own safety, we recommend that you have your
loaded vehicle (with all passengers, luggage and personal objects)
weighed on a public weighbridge before you set out on your journey.
Adapt the speed to the payload. The stopping distance is increased if
the payload is high.
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
