Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 206 van 240
13 Wheels and tyres
206 Exsis I/T - 01/23-1 - EHG-0027-02EN
Fig. 169 Tightening the wheel nuts
or wheel bolts cross-wise
◼ Tighten the wheel nuts or wheel bolts in the order shown in Fig. 169. In
order to do this, use a torque wrench and comply with the specified
tightening torque (see section 13.6.2).
◼ Check regularly that the wheel nuts or wheel bolts are firmly seated. Re-
tighten the wheel nuts or wheel bolts of a changed wheel after 50 km
(30 miles). While doing so, proceed in the order shown in Fig. 169.
◼ When using new or newly painted rims, re-tighten the wheel nuts or
wheel bolts once again after approx. 1,000 to 5000 km (600 miles to
3,000 miles). While doing so, proceed in the order shown in Fig. 169.
◼ For lay-ups or long periods of inactivity, keep the tyres and tyre bearings
free from pressure points:
Jack up the vehicle so that the wheels do not bear any load, or move the
vehicle every 4 weeks in such a way that the position of the wheels is
changed.
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
