Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 191 van 240
Care 11
Exsis I/T - 01/23-1 - EHG-0027-02EN 191
11.9.3 Starting up the vehicle after a temporary lay-up or after lay-
up over winter
On vehicles with a battery capacity indicator, the data are reset when the
main switch on the transformer/rectifier is switched off. Therefore, when
putting the system back into operation, a complete charging cycle must
be carried out in order to calibrate the system. In addition, the date and
time must be reset. If a Duomatic L Plus gas pressure control system is
installed in the vehicle (optional equipment), the defroster function must
be reprogrammed from "Automatic" to "Off".
Go through the following checklist before start-up:
Activity
Done
Base vehicle
If the vehicle has been stationary for a longer period (approx.
10 months) have the braking system checked by an authorised spe-
cialist workshop
Check tyre pressure of spare wheel, if present
Check the tyre pressure on all tyres
Body
Clean the pivot bearing of the entrance step
Check the functioning of the fitted supports
Check that the doors, windows and skylights are working properly
Check the function of all external locks, e.g. the storage flaps, the filler
necks and the living area door
Search for traces of animals that have gained entry
Remove the cover from the waste gas vent of the heater (if there is
one)
Remove the winter cover from the refrigerator grills (if there is one)
Gas system
If the vehicle has been stationary for a longer period (approx.
10 months) have the gas system checked by an authorised specialist
workshop
Put the gas bottles in the gas bottle compartment, tie down and con-
nect to the gas pressure regulator
Electrical system
Connect to 230 V external power supply
Install the living area battery and starter battery, insert the fuses on the
living area battery and fully charge the battery
Charge the battery for at least 20 hours after lay-up.
Connect the living area battery with the 12 V power supply. To do this,
switch on the battery cut-off switch on the transformer/rectifier (see
chapter 8)
Check that the electrical system are working, e.g. interior light, socket
and all installed electrical appliances
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
