Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 185 van 240
Care 11
Exsis I/T - 01/23-1 - EHG-0027-02EN 185
11.7 Water system
11.7.1 Cleaning the water tank
Fig. 153 Cleaning opening (water
tank)
◼ Empty the water tank and close the drainage opening.
◼ Remove the cap (Fig. 153,1) of the water tank.
◼ Fill water tank with water and some washing-up liquid (do not use any
scourers).
◼ Using a trade standard brush for washing dishes, scrub the water tank
until there is no longer any visible deposit.
◼ Scrub also the pump housing.
◼ If possible, clean fresh water sensors through the cleaning openings by
hand.
◼ Rinse water tank with copious amounts of drinking water.
If, due to the design of the water tank, it is not possible to clean the wa-
ter tank mechanically: Use a suitable chemical cleaning agent.
The authorised dealers would be happy to assist you in choosing a suit-
able cleaning agent.
Follow the cleaning agent manufacturer's instructions.
11.7.2 Cleaning the water pipes
Only use approved cleaning agents as sold by the specialist trade.
The cleaning agent must meet national regulations and be approved (if
required).
Collect any emerging mixture of water and cleaning agent for correct dis-
posal.
◼ Empty the water system.
◼ Close all drainage openings and drain cocks.
◼ Fill mixture of water and cleaning agent into the water tank.
Observe the manufacturer's instructions regarding the mixing ratio.
◼ Open the drain cocks one by one.
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
