Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 177 van 240
Care 11
Exsis I/T - 01/23-1 - EHG-0027-02EN 177
11.2.4 Add-on parts made of glass-fibre reinforced plastic (GRP)
Avoid contact between polish and window rubber and piping.
The glass-fibre reinforced plastic (GRP) may not become too hot. There-
fore when polishing with a polishing machine, keep the machine in con-
stant motion.
In the case of large-surface GRP components, superficial cracking may
occur due to ageing. This is a property of the GRP material composite
with GelCoat coating that does not affect the function of the component.
Therefore, there is no reason for complaint.
GRP add-on parts can turn yellow or become weather-worn due to insuffi-
cient care for the vehicle or ageing of the material.
GRP add-on parts should therefore undergo regular follow-up treatment.
This way, these parts will not turn yellow and the sealing of the surface re-
mains intact.
◼ Wash the vehicle and allow to dry as described above. Check if the
GRP add-on parts are clean and dry.
◼ Apply the polisher with a soft cloth evenly on the surface of the GRP
add-on part.
◼ Wait until a light grey film forms.
◼ Wipe the GRP add-on part with a dry, soft cloth. Move the cloth in cir-
cles over the surface of the GRP add-on part.
We recommend using a polishing machine for this work.
Paint protection has to be used to preserve the polish. Please read the
instructions of the paint protection for details on how to apply it.
11.2.5 Underbody
The underbody of the vehicle is partly coated with an age-resistant under-
body protection. Should the underbody protection be damaged, repair imme-
diately. Do not treat areas coated with underbody protection with spray oil.
Only use products approved by the manufacturer. Our authorised deal-
ers and service centres will be happy to advise you.
11.2.6 Engine compartment
Cleaning and care of the engine compartment may only be carried out
while the ignition is switched on.
Let the engine cool down before carrying out any work in the engine
compartment. There is a danger of burns when touching motor compo-
nents that are still hot!
Before carrying out any work in the engine compartment, read and ob-
serve the corresponding warning and handling instructions in the operat-
ing manual of the base vehicle manufacturer.
Have an engine washing only carried out by an authorised specialist
workshop.
Follow-up treatment of GRP
add-on parts:
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
