Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 169 van 240
Sanitary fittings 10
Exsis I/T - 01/23-1 - EHG-0027-02EN 169
Fig. 142 Waste water hose (gas bot-
tle compartment)
Fig. 143 Waste water hose (gas bottle
compartment pull-out)
The waste water hose (Fig. 142,1 or Fig. 143,1) is located in the gas bottle
compartment or in the gas bottle compartment pull-out and can be plugged
on the drain pipe (Fig. 144,1) as an extension.
Fig. 144 Drain pipe with waste water
hose
Fig. 145 Operating lever (waste water
tank)
The drain cock for waste water is operated via an operating lever
(Fig. 145,1). The operating lever (Fig. 145,1) for waste water disposal is lo-
cated under a cover in the rear. The drain pipe with a connection for a waste
water hose is located under the vehicle on the right-hand side.
◼ Attach the waste water hose to the drain pipe.
◼ Open the drain cock. To do this, turn the operating lever (Fig. 145,1) of
the drain cock to the "AUF" (open) position. The waste water will run
out.
◼ Completely empty waste water tank.
◼ Close the drain cock again once all of the waste water has run out. To
do this, turn the operating lever (Fig. 145,1) of the drain cock to the
"ZU" (closed) position.
◼ Remove and store the waste water hose.
Water tank drainage
Waste water hose
Operating lever
Emptying:
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
