Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 139 van 240
Appliances 9
Exsis I/T - 01/23-1 - EHG-0027-02EN 139
The warning symbol (Fig. 116,7) flashes in the event of a warning. The
heater continues to operate. In the event of only a temporary fault, the warn-
ing symbol goes out automatically.
In the event of a warning, the control unit displays the error code for the
fault. The heater is switched off. Press rotary push button to restart the
heater.
Further information can be obtained in the manufacturer's instruction
manual.
Fig. 118 Damper (opened)
The heater for the rear area can be adjusted separately via dampers
(Fig. 118,1).
The dampers are installed in the side walls of the vehicle on the right and
left side of the bunk bed mattress.
The heat output varies depending on the position of the dampers.
9.2.4 Wall flue
Fresh air and exhaust gases of the heater system are conducted in a two-
chamber wall flue.
Park the vehicle such that the wall flue gets enough fresh air.
The wall flue must be free at all times. Do not cover the wall flue.
When camping in winter, maintain wall flue free of snow and ice.
Check the wall flue periodically depending on the weather (snow, leaf
fall, dirt, etc.). If necessary, clean the wall flue.
When washing the vehicle do not aim the water jet directly at the wall
flue.
When disregarding this, the flawless operation of the heater can not be
guaranteed.
Fault display
Heat distribution in the
rear area
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
