Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 137 van 240
Appliances 9
Exsis I/T - 01/23-1 - EHG-0027-02EN 137
Fig. 117 Safety/drainage valve
(boiler)
See section 10.7.
The boiler can be supplied with water from the water tank.
◼ Switch on the 12 V power supply on the panel.
◼ Close the safety/drainage valve. Turn the knob (Fig. 117,1) perpendicu-
lar to the safety/drainage valve and push the push button (Fig. 117,2) in.
◼ Set all the water taps to "Hot" and open them. The water pump is turned
on. The warm water pipes are filled with water.
◼ Keep the water taps open until the water flowing out of the water taps
has no bubbles in it. This is the only way to ensure that the boiler is full
of water.
◼ Close all water taps.
◼ Switch off hot water production.
◼ Open the safety/drainage valve. To do this turn the knob (Fig. 117,1)
parallel to the safety/drainage valve. The push button (Fig. 117,2) jumps
out. The boiler is drained to the outside by the safety/drainage valve.
◼ Check whether the water has been drained completely from the boiler
(approx. 10 litres).
For further information about emptying the water system see sec-
tion 10.3.6.
For further information about the boiler see the separate manufacturer's
instruction manual and observe the maintenance instructions in chap-
ter 12.
The hot-water heater with the boiler can be operated with various energy
sources.
◼ Turn rotary push button (Fig. 115,6) until the menu symbol operating
mode (Fig. 116,3) flashes.
◼ Press rotary push button.
Position
Filling/emptying the boiler
Filling the boiler with water:
Emptying the boiler:
Operating modes
Selecting operating mode:
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
