Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 113 van 240
Electrical system 8
Exsis I/T - 01/23-1 - EHG-0027-02EN 113
Fig. 100 "Navi" switch
Only use the transformer/rectifier to charge the living area battery. There-
fore, connect the vehicle to a 230 V power supply system as often as possi-
ble. As a principle, only use the 230 V connection on the vehicle (CEE
socket outlet) for connecting.
Charge the battery for at least 48 hours after a total discharge.
At temperatures below 0 °C, a living area battery consumes less power.
At approx. -15 °C, there will be no more power. The living area battery
can no longer be charged.
Always connect the load and charging lines cross-wise. This is neces-
sary to ensure the batteries always have the same line resistance to one
another. This allows the charging/discharging current to be distributed
equally.
This section contains instructions on the storage of the living area battery.
◼ Store the disconnected battery in a cool and dry place.
◼ In the case of a disconnected, fully charged gel battery it may suffice to
recharge the battery after 6 months.
Recommendation: Also charge a gel battery for 24 to 48 hours every 4 to
6 weeks.
If there is an "intelligent" charger with float charge functionality, have the
charger connected to the battery and switched on over the entire lay-up
time.
Fig. 101 Connecting auxiliary battery
To ensure that all batteries are charged or used up equally, the batteries are
connected according to Fig. 101.
Charging
Storage
Installation of auxiliary
battery
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
