Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 107 van 240
Electrical system 8
Exsis I/T - 01/23-1 - EHG-0027-02EN 107
8 Electrical system
Chapter overview
This chapter contains instructions regarding the electrical system of the ve-
hicle.
The operation of the electrical appliances of the housing body is described
in chapter 9.
8.1 General safety instructions
Only allow qualified personnel to work on the electrical system.
All electrical devices (e.g. mobile phones, radios, televisions or DVD
players) that are retrofitted into the vehicle and operated during the
journey must have a CE marking and be verifiably tested according to
DIN VDE 0100 721. Please contact an authorised specialist work-
shop.
Only in this way can the functional reliability of the vehicle be ensured.
Otherwise the airbag may be triggered or interference to the on-board
electronics may result.
After the vehicle is started, delays to the output or forwarding of electri-
cal impulses are possible.
The control unit of the basic vehicle does not release the D+ signal until
the engine has reached full performance. In the event of a cold start in
winter, this can take up to 15 seconds.
For this reason, output of warning signals (such as "entrance step ex-
tended") may sometimes be delayed.
The automatic retraction of a SAT antenna can also be delayed.
During a storm, to protect the electrical devices disconnect the 230 V
connection and retract the antennae.
8.2 Terms
The off-load voltage is the voltage of the battery in idle condition, i. e. no cur-
rent is consumed and the battery is not being charged.
The battery must remain idle for a while before measuring. After charg-
ing the last time, or after the last current has been drained by appli-
ances, wait approximately 2 hours before measuring the off-load volt-
age.
Some electrical appliances, such as indicator lamps, TV unit or USB sock-
ets, require electrical current all the time; that is why they are also referred
to as inactive appliances. This closed circuit current flows even if the device
has been switched off.
Off-load voltage
Closed circuit current
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
