Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 69 van 286
Pitching the Motorcaravan 5
B-MC I/T - 01/23-1 - EHG-0016-03EN 69
Fig. 48 Lever (emergency release)
◼ Remove the red protective cap from the support valve of the steady leg.
◼ Open the support valve with a screwdriver. To do this, turn the screw in
the support valve clockwise as far as it will go.
◼ Retract the steady leg with the hand pump. To do this, pump with the
lever (Fig. 48,1) until the steady leg is retracted.
◼ Close the support valve again. Unscrew the screw.
◼ Place the red protective cap on the support valve.
◼ Contact customer service.
5.8 230 V connection
The vehicle can be connected to a 230 V power supply (see chapter 8).
5.9 Refrigerator
If the refrigerator is set to 12 V operation, it will constantly consume
current. Therefore, switch over to gas operation when the vehicle en-
gine is not running, and the vehicle is not connected to the 230 V
power supply.
For units with an automatic power selection, the 12 V operation of the refri-
gerator only functions in the automatic mode when the vehicle engine is run-
ning. When the vehicle engine is switched off, the automatic energy selec-
tion switches the refrigerator to 230 V operation or gas operation.
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
