Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 37 van 286
Before the journey 3
B-MC I/T - 01/23-1 - EHG-0016-03EN 37
3.5 Caravan coupling
When attaching a caravan coupling, refer to the vehicle documents for
the maximum nose weight and the technically permissible towable
mass.
Retighten the caravan coupling fixing screws after 1000 operating
hours.
The bike rack and caravan coupling may not be used simultaneously.
Have your authorised dealer or authorised service centre install the add-
on parts. They will also take care of all the formalities for you.
Observe the manufacturer's instruction manual.
Fig. 8 Caravan coupling (detach-
able)
3.6 Entrance steps
Before commencing the journey and after short interruptions of the
journey, ensure that the entrance step is completely retracted.
Do not stand in the direct range of the entrance step while it is being
retracted or extended.
Do not step on the entrance step until it has extended completely.
There is a risk of injury!
To prevent danger of slipping, clean the entrance step if necessary
before entering (snow, ice, mud, etc.).
Do not under any circumstances raise or lower persons or loads with
the entrance step.
Following a cold start, for vehicle-related reasons it can take a few se-
conds before the warning tone sounds.
Observe the maximum load for the entrance step according to the ma-
nufacturer's instruction manual.
Do not grease or lubricate the pivot bearing and joints of the entrance
step (see chapter 11).
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
